Blue Line Innovations PowerCost Monitor Betriebsanweisung PDF herunterladen (Seite 2)

WARRANTY - LIMITED ONE YEAR WARRANTY

Blue Line Innovations warrants this product to be free from defects in

materials and workmanship for a period of one year from the date of sale to

the original user or consumer purchaser. Blue Line Innovation’s exclusive

obligation under this warranty shall be, at its option, (a) to supply, without

charge, a replacement of the product or (b) to refund the purchase price in

respect of any product that is found to be defective and that is returned, with

its proof of purchase, to the original supplier.

This warranty excludes and does not cover defects, malfunctions, or

failures caused by misuse, unauthorized repairs, modifications or accidental

damage.

Note: This warranty does not apply to batteries or damage to the product

caused by the use of faulty batteries.

Warning: Changes or modifications not expressly approved by Blue Line

Innovations Inc. void the user’s authority to operate the equipment.

This warranty is only applicable to a product purchased through a Blue Line

Innovations authorized dealer.

In no event shall Blue Line Innovations be liable for consequential or

incidental damages.

This warranty is in lieu of all other expressed warranties. The duration of

any implied warranty is limited to the period of the expressed warranty set

forth above.

Blue Line Innovations Inc.

187 Kenmount Road

1st Floor, ICON Building

St. John’s, NL Canada

A1B 3P9

[email protected]

www.bluelineinnovations.com

Toll Free: 1-866-607-2583

rights reserved. Information in this document

is subject to change without notice. Blue

Line Innovations and PowerCost Monitor

are trademarks of Blue Line Innovations

Incorporated. All other trademarks are the

property of their respective owners.

Printed in China. PN BLI-00299R001

Time and Temperature – Bottom Row

APPL – Measuring a single appliance

The bottom row displays the current day of the week, as well as the temperature and time

in the formats you selected when con figur ing the Display Unit (degrees Fahrenheit or

Celsius and 12-hour or 24-hour clock).

The APPL button allows you to measure how much electricity is

consumed by a single appliance.

When you press APPL, the Display Unit memorizes the total current consumption and

then displays only the consumption above that value until you press APPL again.

First, turn off the appliance you wish to measure, wait a few minutes, press the APPL

button, then turn on the appliance. The APPL indicator is displayed in the top row

and, after a few more minutes, the values displayed represent the energy currently

consumed by that particular appliance.

You can also choose to press APPL first, then turn off the appliance. The value

displayed will still be positive, as it will represent the quantity of electricity that the

appliance was consuming before you turned it off.

When you are done, press APPL again to return to normal mode.

NOTE: To obtain realistic results, you should ensure that no other appliance, light

bulb, etc. is turned on or off while you are measuring an appliance.

Resetting the Totals

Press-and-hold the CLEAR button located on

the front of the Display Unit until you hear a

beep.

This resets the Total values (Dollars and kW)

that appear on the middle row, and starts a

new 30 day cycle. All the other values remain

the same.

By resetting the totals on the first day of your

billing cycle, you can always have a rough idea

of your next monthly electricity bill.

/hr

ON-PEAK

TOTAL

TUE

ON-PEAK

TOTAL

kWh

TUE

Kilowatt ModeDollars & Cents Mode

Factory (Hard) Reset

To reset the Display Unit to its factory-set default values, simultaneously press-and-

hold the CLEAR and PROG/SYNC

buttons until you hear a beep.

All the values you entered are deleted and your Display Unit is configured with its

default factory settings.

SLEEP Mode

In the event that your Display Unit loses the signal transmitted

by your Sensor Unit, the middle row displays SLEEP. You will

also notice that the first row displays dashes instead of values,

and since the Sensor Unit also transmits temperature information,

the temperature disappears from the last row.

For example, loss of signal may occur if you move the Display Unit

to a location in your house that is too far from the Sensor Unit.

Here are a few causes of loss of signal:

➢

The Sensor Unit batteries are exhausted.

➢

The Display Unit has been moved out of range of the

Sensor Unit.

➢

There is a strong interference from other electronic devices,

such as wireless weather stations.

To restore communications between the two units, simply press

any key on the Display Unit. The bar should start moving and

values should start being displayed after a short time.

If the problem persists, see the Troubleshooting section on the

reverse side.

/hr

WED

TARE

ON-PEAK

TUE

Dollars & Cents Mode

/hr

WED

ON-PEAK

TUE

Kilowatt Mode

$/kW

TOTAL/EST

APPL

CLEAR

1 2 3 4 5 6 7 ... 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Blue Line Innovations PowerCost Monitor Betriebsanweisung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wetterstationen Blue Line Innovations PowerCost Monitor