Blue Line Innovations PowerCost Monitor Bedienungsanleitung PDF herunterladen (Seite 10)

4.3.Verifying the Basic Operation

Your Sensor Unit comes pre-programmed with a unique ID code so it will only work with

your Display Unit. This synchronization step ensures that both the Display Unit and Sensor

Unit operate properly using the same ID code.

1. Press and hold the SYNC button on the front of the Display Unit until you hear a beep

(approx. 3 seconds). The Display Unit displays this screen:

2. Press and release the RESET button on the battery cover of the Sensor Unit.

The display exits ID mode and displays this screen.

If your Display Unit does not react as described above, repeat steps 1 and 2 and,

if you still do not get the expected results, see the Troubleshooting section at the

end of this User Guide.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Keine Kommentare

Blue Line Innovations PowerCost Monitor Bedienungsanleitung Seite 10